Transducers
Mostrando 1-12 de 386 artigos, teses e dissertações.
-
1. The Surface Treatment of Niobium Superconducting Reentrant Cavities by Means of High Temperature Nitrogen Plasma Based Ion Implantation
High Temperature Nitrogen Plasma Based Ion Implantation (HT-NPBII) has been used to treat the surface of niobium superconducting reentrant cavities, which are part of parametric transducers in a resonant-mass gravitational wave detector. The aim is to enhance the corresponding electrical quality factors (Q-factors) which are closely related with the increase
Mat. Res.. Publicado em: 13/12/2019
-
2. Echotextural characteristics of the mammary gland during early lactation in two breeds of sheep varying in milk yields
Abstract The main goal of this preliminary study was to determine and compare ultrasonographic characteristics of the mammary gland in two genotypes of ewes varying in milk productivity at 2, 3 and 4 weeks after lambing. Ultrasonographic images of the udder were obtained using the 5.0- and 7.5-MHz transducers, in axial and coronal planes, in four low milk-yi
Anim. Reprod.. Publicado em: 25/11/2019
-
3. Desenvolvimento de sistema de baixo custo para monitoramento de integridade estrutural
RESUMO O Monitoramento da Integridade Estrutural (MIE) pode ser utilizado para avaliar as condições de integridade de uma estrutura, ou ainda para verificar modelos de comportamento da mesma. Os atuais sistemas de monitoramento aplicados em grandes estruturas, contam com inúmeros sensores, dos mais variados tipos, que formam redes de comunicação, em alg
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Wheel-flat detection on trams using envelope analysis with Hilbert transform
Abstract The wheel-flat defect is one of the many issues decreasing the level of and comfort in light rail vehicles. The two main causes of wheel-flats are temporary or complete wheel blocking. The negative effect is the increase of the dynamic phenomenons in the wheel-rail interaction, which are impulsive in their nature. It could prove to be dangerous for
Lat. Am. j. solids struct.. Publicado em: 18/02/2019
-
5. ENERGY EFFICIENCY OF A CENTER PIVOT IRRIGATION SYSTEM
ABSTRACT This study aimed to evaluate the energy efficiency of a center pivot irrigation system operating in a terrain of variable topography. Values of Pumping Energy Efficiency (PEE), Supply Energy Efficiency (SEE), Global Energy Efficiency (GEE) and Specific Energy (Es in kWh m-3) computed at 18 different angular positions of the lateral line were used as
Eng. Agríc.. Publicado em: 2018-04
-
6. In vivo standardization of bone ultrasonometry of the clavicle
OBJECTIVE: The assessment of fracture union includes physical examination and radiographic imaging, which depend on the examiner’s experience. The development of ancillary methods may avoid prolonged treatments and the improper removal of implants. Quantitative bone ultrasonometry has been studied for this purpose and will soon be included in clinical pra
Clinics. Publicado em: 2016-03
-
7. Stiffening Effect of Bolt-On Transducers on Strain Measurements
Abstract The strain of a structural element is often measured indirectly by determining the strain of a transducer that is supposed to follow the deformation of the element perfectly, and with negligible interaction, around the mounting point. However, this assumption is not always true, and depends on the stiffness of the transducer relative to the local st
Lat. Am. j. solids struct.. Publicado em: 2016-03
-
8. Myeloproliferative neoplasms and the JAK/STAT signaling pathway: an overview
ABSTRACTMyeloproliferative neoplasms are caused by a clonal proliferation of a hematopoietic progenitor. First described in 1951 as 'Myeloproliferative Diseases' and reevaluated by the World Health Organization classification system in 2011, myeloproliferative neoplasms include polycythemia vera, essential thrombocythemia and primary myelofibrosis in a subgr
Rev. Bras. Hematol. Hemoter.. Publicado em: 2015-10
-
9. Electromechanical Impedance - Based Structural Health Monitoring Instrumentation System Applied to Aircraft Structures and Employing a Multiplexed Sensor Array
ABSTRACT: The electromechanical impedance method has been seen as a promising tool for structural health monitoring regarding different types of structures and purposes. Most importantly, this method can be used in real-time applications. Frequently, massive, high-cost, single-channel impedance analyzers are used to process the time domain data, aiming at ob
J. Aerosp. Technol. Manag.. Publicado em: 2015-09
-
10. Etched FBG written in multimode fibers: sensing characteristics and applications in the liquid fuels sector
AbstractIn this work, a refractometric fiber sensor for the liquid fuels sector is described. The use of etched FBGs produced in multimode fibers is proposed to overcome the drawbacks associated with sensing high refractive index samples employing fiber transducers. The transducer sensitivity can be tailored by adjusting the final diameter of the etched Brag
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2015-06
-
11. Evaluation of rotator cuff muscle strength in healthy individuals
OBJECTIVE: To compare the strength generated by the rotator muscles of the shoulder joint between the right upper limb and left upper limb among healthy individuals. METHODS: To evaluate the muscle strength of upper limbs from isometric contractions in the horizontal direction (rotation) an isometric dynamometer was used, equipped with transducers, signal c
Acta ortop. bras.. Publicado em: 2015-06
-
12. Theoretical modeling of low-attenuation lamb wave modes generation in three-layer adhesive joints using angle beam transducer
AbstractIn this paper, at first the attenuation of Lamb waves in three-layer adhesive joints, including two elastic plates bonded together by a viscoelastic adhesive layer, is investigated using Global matrix method and then suitable incidence angle is theoretically calculated to generate low-attenuation Lamb waves using angle beam transducer. Theoretical bo
Lat. Am. j. solids struct.. Publicado em: 2015-03