Ultrasonic Transducer
Mostrando 1-12 de 31 artigos, teses e dissertações.
-
1. Mejora en la calidad de imágenes ultrasónicas aplicando métodos de composición espacial y empleando sistemas de Phased Array
ABSTRACT The Phased Array Ultrasonic Technique (PAUT) has become a widely used imaging tool for the Nondestructive Testing in the industrial field. The PAUT allows making deflections and focusing the ultrasound beam at different depths within the material, through an electronic control of each one of the N elements that make up the array transducer. Thus, se
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Ultrasonic method of microvibration detection: part II - additional processing method and applications
Abstract Introduction In the last 28 years, the scientific community has been using elastography to evaluate the mechanical properties of biological tissue. The aim of this work was the optimization of the UDmV method, presented in Part I of the series, by means of modifying the technique employed to generate the reference sine and cosine functions, used fo
Res. Biomed. Eng.. Publicado em: 17/08/2017
-
3. A flexible multichannel FPGA and PC-Based ultrasound system for medical imaging research: initial phantom experiments
IntroductionIn this paper, we present the initial results of a fully programmable 128-channel FPGA and PC-based system that has been developed for medical ultrasound (US) imaging research in our University laboratory (Federal University of Technology - Paraná, Brazil).MethodsIn order to demonstrate the feasibility of the US research system, two applications
Res. Biomed. Eng.. Publicado em: 29/09/2015
-
4. Acoustic beam modeling of ultrasonic transducers and arrays using the impulse response and the discrete representation methods
The impulse response of the velocity potential and the discrete representation methods were used in order to model the acoustic field radiated by ultrasonic transducers and arrays. The first method deals with the calculation of the exact impulse response, in which solutions are possible only for simple geometries, such as the circular piston. The second meth
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-12
-
5. Otimização topológica de transdutores piezelétricos com gadação funcional de material: projeto, simulação, análise e fabricação. / Topology optimization of piezoelectric transducers considering functionally graded material: design, simulation, analysis and fabrication.
Piezoelectric materials generate displacements when they are excited by electrical potential and electrical potential when they are excited by force or pressure. These materials are widely applied in Precision Mechanics, Mechatronics, and Ultrasonic imaging areas. On the other hand, Functionally Graded Materials (FGM) are advanced materials, whose properties
Publicado em: 2010
-
6. Caracterização de solda por resistência a ponto através de avaliações não destrutivas. / Spotweld characterization through non destructive evaluation.
The aim is to describe the ultrasound technique, applied to the inspection of the resistance spot welding, and to demonstrate the advantages of this technique over the conventionally standardized destructive tests used in spotweld inspections until mid 1999, when the ultrasound technique began to be applied in Brazil. For this, two experimental procedures we
Publicado em: 2010
-
7. Transdutor híbrido para medidas susceptométricas e ultrassônicas simultaneamente / Hybrid transducer for susceptométricas and ultrasonic measures simultaneously.
Este trabalho descreve a construção e caracterização de um novo transdutor dedicado às medições susceptométricas e ultrassônicas de amostras marcadas com partículas magnéticas. Este transdutor, denominado de magnetoacústico, consiste de um sistema híbrido formado pela junção de um Biossusceptômetro de Corrente Alternada (BCA) e um transdutor
Publicado em: 2010
-
8. Acionamento de elemento ceramicos de tansdutores de ultra-som : circuitos de controle, de transmissão e de recpção / Ultrasound ceramic transducer arrays : control, transmission and reception circuits
Os equipamentos de imagem por ultra-som associam diferentes técnicas e provêm informações não só das estruturas anatômicas como também do estado funcional dos diversos sistemas, em tempo real, com excelente qualidade de imagem. Isto se deve ao desenvolvimento de transdutores cada vez mais aprimorados e, ainda, da utilização de eletrônica digital,
Publicado em: 2009
-
9. Método de otimização topológica aplicado ao projeto de sonotrodos para transdutores piezelétricos. / Topology optimization method applied to the design of transducers sonotrodos piezoelectric.
This work aims at the development of a method based on Topology Optimization to design a mechanical structure, called sonotrode, which is a device usually connected to a high power piezoelectric transducer (mechanical device capable of converting electric energy into mechanical displacement or vice-versa). A sonotrode transmits mechanical vibrations of a pie
Publicado em: 2008
-
10. Development of an automatic mechanism to cut piezoelectric ceramics using abrasive wire. / Desenvolvimento de um mecanismo automático de corte por fio abrasivo de cerâmicas piezelétricas.
The objective of this work is to describe one great and simple mechanism that is capable of machining PZT ceramic by wear. That mechanism will be used to produce piezocomposites transducers more easily by the "Dice and Fill" method. This work also explains how the ceramic material can be worn and which variables are important in this wear. It is also present
Publicado em: 2008
-
11. Simuladores para medição de fluxo de liquidos por efeito doppler para controle de qualidade de equipamentos de ultra-sonografia / Doppler phantoms for flow measurement of liquids for ultrasond equipment quality control
In this work it is proposed the development of phantoms to allow de quality control of ultrasounds equipments functioning on the Doppler mode with national technology and accessible cost. The device consists of a hydraulic circuit with a peristaltic pump, mixture simulating human tissue, tubes simulating arteries and blood-mimicking fluid. The peristaltic di
Publicado em: 2008
-
12. Study of the cutting process of piezoelectric ceramics with diamond blades for the manufacturing of piezocomposites. / Estudo do processo de corte de cerâmicas piezelétricas com discos adiamantados para a fabricação de piezocompósitos.
This work presents a study of the diamond blade dicing of piezoceramic slabs to fabricate piezocomposites by dicing and fill process. A diamond blade dicing machine is designed according the needs of the dicing and fill process to produce piezocomposites which requires dicing with diamond blades as thin as 30µm. The dicing machine has a high speed (up to 60
Publicado em: 2007