Velocities Model
Mostrando 1-12 de 147 artigos, teses e dissertações.
-
1. EFFECT OF THE DOWNWASH FLOW FIELD OF A SINGLE-ROTOR UAV ON DROPLET VELOCITY IN SUGARCANE PLANT PROTECTION
ABSTRACT Protecting against the main sugarcane diseases and insect pests requires good control at the base of the plant; therefore, higher droplet penetration is required during plant protection. The objectives of this research were to explore the movement mechanism of droplets in a sugarcane protection operation using a single-rotor unmanned aerial vehicle
Eng. Agríc.. Publicado em: 2021-04
-
2. Numerical and experimental evaluation of the thermally stratified atmospheric boundary layer in wind tunnels
Abstract The atmospheric boundary layer (ABL) flow occurs due to the interaction between the Earth’s surface and atmosphere, and it usually happens under thermal stratification. Therefore, in order to emulate this phenomenon, atmospheric wind tunnels need appropriate devices, such as spires and cubical roughness elements, at the entrance of the wind tunnel
REM, Int. Eng. J.. Publicado em: 2021-01
-
3. Analysis of physical mechanisms of human body instability for the definition of hazard zones present in emergency action plans of dams. Case study: Santa Helena Dam, Bahia
RESUMO Os impactos produzidos pelas ondas de cheias decorrentes de ruptura de barragens geralmente causam danos irreversíveis à população residente e a perda do equilíbrio do corpo nas inundações contribui para o agravamento desse cenário. Nesse contexto, esse trabalho teve como objetivo analisar a influência da consideração dos mecanismos físico
RBRH. Publicado em: 07/10/2019
-
4. Investigation of the effect of nozzle design on rheological bioprinting properties using computational fluid dynamics
ABSTRACT Bioprinting is the utilization of techniques derived from three-dimensional printing to generate complex biological structures which may replace natural tissues or organs. It employs high spatial resolution deposition of different cell types, growth factors and biomaterials. Those together form bioinks, which are the bioprinting inputs, analogously
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Mathematical drying kinetics modeling of jackfruit seeds (Artocarpus heterophyllus Lam.)
RESUMO A jaca (Artocarpus heterophyllus Lam.) é uma fruta com polpa rica em carboidratos, cálcio, fósforo, ferro e vitaminas do complexo B. No processamento da polpa é gerada uma grande quantidade de resíduos, onde incluem-se as sementes. Consumidas após cozimento, podem também passar por torra, moagem e incorporação em produtos de panificação. Co
Rev. Ciênc. Agron.. Publicado em: 04/07/2019
-
6. Three-dimensional numerical simulation of flow in vertical slot fishways: validation of the model and characterization of the flow
RESUMO As escadas para peixes com ranhuras verticais permitem que ocorra a dissipação da energia do escoamento em função da forma da bacia, dos defletores, da declividade longitudinal e da largura da ranhura vertical. Estas estruturas devem apresentar padrões médios e turbulentos do escoamento compatíveis com os peixes que irão transpô-la. Tipicame
RBRH. Publicado em: 11/04/2019
-
7. Drying and extraction of astaxanthin from pink shrimp waste (Farfantepenaeus subtilis ): the applicability of spouted beds
Abstract In this study, the spouted bed drying technique was used to obtain powder from shrimp wastes, with high quality for subsequent extraction of astaxanthin using vegetable oil, as alternative to organic solvents. Shrimp waste paste was dried in three inlet air temperatures (70, 80 and 90 °C), and air velocity used in the experiments was 100% over min
Food Sci. Technol. Publicado em: 30/07/2018
-
8. Investigations on the mechanism and behavior of dynamic energy absorption of metal foam
Abstract Metal foams have been widely used in the engineering fields due to its excellent energy absorption capacity under impact. Under different impact velocities, metal foam exhibits different energy absorption properties. It is important to investigate the mechanism and behavior of energy absorption of metal foam under impact. In this study, a 3D micros
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
9. Development of a Method Based on DLLME and UFLC-DAD for the Determination of Antibiotics in Honey Samples and the Study of Their Degradation Kinetics
In this work, a method was developed, based on dispersive liquid-liquid microextraction (DLLME) and analysis by ultra-fast liquid chromatography coupled to diode array detector (UFLC-DAD), to simultaneously determine ten antibiotics of two different classes in honey, as well as to evaluate their degradation kinetics in this matrix. The extraction was optimiz
J. Braz. Chem. Soc.. Publicado em: 2018-07
-
10. Interleukin-6 contributes to myocardial damage in pregnant rats with reduced uterine perfusion pressure
Preeclampsia is one of the most frequent and difficult illnesses in pregnancy, which jeopardizes both mother and fetus. There are several diagnostic criteria for preeclampsia. However, the preeclampsia-associated myocardial damage has not been described. In this study, we employed reduced uterine perfusion pressure (RUPP) to generate a rat model of preeclamp
Braz J Med Biol Res. Publicado em: 11/06/2018
-
11. High-velocity Penetration of Concrete Targets with Three Types of Projectiles: Experiments and Analysis
Abstract This study conducted high-velocity penetration experiments using conventional ogive-nose, double-ogive-nose, and grooved-tapered projectiles of approximately 2.5 kg and initial velocities between 1000 and 1360 m/s to penetrate or perforate concrete targets with unconfined compressive strengths of nominally 40MPa. The penetration performance data of
Lat. Am. j. solids struct.. Publicado em: 2017-09
-
12. Phenomenology of the Maximum Fragment Mass Dependence Upon Ballistic Impact Parameters
Abstract Molecular dynamics simulations of the ballistic Taylor test are used to explore correlation between the largest fragment mass and the impact energy of a projectile as well as a set of selected state variables. Flat-ended, monocrystalline, nanoscale bars collide with a rigid wall with striking velocities ranging from 0.27 km/s to 60 km/s. The investi
Lat. Am. j. solids struct.. Publicado em: 2017-08