Viscosity In Solution
Mostrando 1-12 de 167 artigos, teses e dissertações.
-
1. Osmotic dehydration kinetics of fresh and frozen blueberries considering volume shrinkage in a novel ternary solution
Abstract Osmotic dehydration is a nonthermal processing technology, that is limited in blueberries because of the osmotic agent, temperature and efficiency. This study was to prepare a novel ternary solution considering low-sugar, low-salt and low-viscosity requirements and to dehydrate blueberries at 20 °C. The mass transfer kinetics of fresh and frozen bl
Food Sci. Technol. Publicado em: 2021-09
-
2. Method for Cleaning Back-Produced Water from Polymer Flooding Operations to Determine Polymer Molar Mass Using Size-Exclusion Chromatography
One of the methods used by the oil industry to increase production is to inject water, containing polymer, into the reservoir. The viscosity of the aqueous solution is primarily responsible for the efficiency of this method, and is achieved using polymers with high molar mass. However, polymer degradation can occur during pumping and fluid displacement in th
J. Braz. Chem. Soc.. Publicado em: 2020-12
-
3. Effects of Temperature and Concentration on the Determination of PET Viscosity
This work describes the use of experiment planning to investigate the effects of the variables temperature and concentration of the polymer solution on the viscosity test of polyethylene terephthalate (PET). For this, the response surface methodology was based on a central composite rotatable design (CCRD) to optimize the combinations of the analytical condi
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
4. INTERACTIONS BETWEEN ADJUVANTS AND THE FUNGICIDE AZOXYSTROBIN+BENZOVINDIFLUPYR IN HYDRAULIC SPRAYING
ABSTRACT Adjuvants are tools to maximize pesticide spray quality. This study aimed to evaluate the interaction effects between adjuvants and the fungicide azoxystrobin + benzovindiflupyr on the physicochemical characteristics, droplet evaporation time, and spray droplet size. The experiment was carried out using a 2×6 factorial scheme, in which the first fa
Eng. Agríc.. Publicado em: 04/11/2019
-
5. Fabrication of Fish Gelatin Microfibrous Mats by Solution Blow Spinning
In this work microfiber mats of Nile tilapia (Oreochromis niloticus) gelatin were successfully fabricated by using Solution Blow Spinning technique. The concentration and viscosity of fish gelatin solution, in acid acetic/water (80% v/v), were correleted to the morphology and diameter of the gelatin microfibers. It was found that increased solution viscosity
Mat. Res.. Publicado em: 30/09/2019
-
6. Avaliação morfológica de fibras eletrofiadas de policaprolactona em função do tipo de solvente
RESUMO Recentemente, estratégias da engenharia tecidual para o tratamento de feridas e queimaduras prevê o uso de biomateriais nanoestruturados capazes de facilitar a regeneração da pele e a cura das feridas. Um dos processos utilizados para a obtenção deste tipo de biomaterial é a eletrofiação. Por meio deste processo é possível formar filmes com
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. PVC MEMBRANES PREPARED VIA NON-SOLVENT INDUCED PHASE SEPARATION PROCESS
ABSTRACT Polyvinylchloride (PVC) based membranes are prepared via a phase inversion method using N,N-dimethylacetamide (DMAc) as solvent and water as precipitation bath. Polyvinylpyrrolidone (PVP) and lithium nitrate (LiNO3) are used as additives. Experimental cloud point data and solution viscosity measurements are evaluated. Precipitation rates, transport
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
8. Effect of Preparation Method on the Electrical and Mechanical Properties of PVC/Carbon Nanotubes Nanocomposites
The biggest challenge for the development of carbon nanotubes polymeric nanocomposites is in the suitable dispersion and distribution of the nanometric particles along the polymer matrix. Several preparation methods have been used to obtain nanocomposites, highlighting the mixture with polymer solution followed by solvent evaporation and the hot compacting.
Mat. Res.. Publicado em: 02/08/2018
-
9. Ultrasound-assisted synthesis of polyacrylamide-grafted sodium alginate and its application in dye removal
Abstract A polymeric adsorbent based on sodium alginate (SAG) grafted with polyacrylamide (PAM) (SAG- g-PAM) was synthesized using an ultrasound-assisted method. The addition polymerization was carried out with ammonium persulfate as the initiator, at different acrylamide (AM) concentrations. The SAG-g-PAM copolymers were evaluated by FTIR and 13C NMR spect
Polímeros. Publicado em: 21/05/2018
-
10. SPINNABILITY, MORPHOLOGY AND MECHANICAL PROPERTIES OF GELATINS WITH DIFFERENT BLOOM INDEX
Abstract The influence of the concentration, viscosity, electrical conductivity and Bloom index of gelatin solutions on the electrospinning process and the fibrous membrane formed was evaluated. Electrospun membranes were produced at different concentrations for three Bloom values (90, 250 and 280); the solutions were evaluated in terms of viscosity and elec
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
11. THE FORMATION BEHAVIOR OF A SINGLE BUBBLE IN POWER-LAW FLUIDS
Abstract The formation behavior of a single bubble in power-law fluids (carboxymethyl cellulose solution, CMC) and Newtonian fluids (glycerol solution) was experimentally investigated via a high-speed camera. The effects of liquid property, orifice diameter and gas flow rate on bubble volume and aspect ratio were observed. It was found that the formation tim
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
12. Chemo-Rheological Behavior of Aqueous Titanium Carbide Suspension and Evaluation of the Gelcasted Green Body Properties
Gel-casting is an advanced colloidal processing method for fabricating ceramic green parts. In this project acrylamide-based monomers were used as a gelcasting system. The effects of tetramethylammonium hydroxide and polyethylenimine dispersants on the premix solution containing titanium carbide powder have been studied via observation of the zeta potential
Mat. Res.. Publicado em: 12/12/2016