Von Mises Stress
Mostrando 1-12 de 58 artigos, teses e dissertações.
-
1. Effect of Orthodontic Bracket Type and Mouthguard Presence on the Stress and Strain during a Frontal Impact
Resumo O objetivo deste estudo foi analisar a influência da presença e tipo de bráquete ortodôntico (metálico ou cerâmico), e a presença de protetor bucal na resposta biomecânica durante impacto. Modelos bidimensionais em estado plano de deformação de paciente com incisivo central superior com overjet positivo acentuado foram criados baseados em to
Braz. Dent. J.. Publicado em: 2020-09
-
2. Implant Volume Loss, Misfit, Screw Loosening, and Stress In Custom Titanium and Zirconia Abutments
Resumo O objetivo neste estudo foi verificar o efeito da diminuição de volume do implante, desajuste vertical entre o pilar e plataforma protética, torque de afrouxamento do parafuso protético e distribuição da tensão no parafuso em pilares de titânio e zircônia. Dez pilares personalizados de cada material foram fresados e conectados aos implantes d
Braz. Dent. J.. Publicado em: 2020-08
-
3. Simulation of Stress Distribution on the Upper First Molar and Alveolar Bone with the Transpalatal Arch and Upper Second Molar Using Finite Element Analysis
Abstract Objective: To evaluate the differences in the stress distribution on the upper first molar with and without transpalatal arch and a second molar when a 150 g force is applied during canine distalization using finite element analysis. Material and Methods: We constructed several models with data obtained by scanning human skulls using cone beam com
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 13/01/2020
-
4. Influence of Abutment Collar Height and Implant Length on Stress Distribution in Single Crowns
Resumo Este estudo avaliou a influência da altura da porção transmucosa do pilar protético com junção cone morse e do comprimento dos implantes no comportamento biomecânico coroas unitárias com diferentes proporção coroa-implante. Seis modelos virtuais (S11, M11, L11, S13, M13 e L13) foram construídos combinando pilares protéticos com transmucoso
Braz. Dent. J.. Publicado em: 03/06/2019
-
5. Failure Probability, Stress Distribution and Fracture Analysis of Experimental Screw for Micro Conical Abutment
Resumo O objetivo deste estudo foi avaliar a probabilidade de falha de dois tipos de parafusos para pilar protético após a compressão e analisar a distribuição da tensão com o método dos elementos finitos. Sessenta (60) restaurações unitárias foram montadas em implantes de titânio (e-fix, A.S. Technology - Titanium Fix). Os grupos foram divididos
Braz. Dent. J.. Publicado em: 04/04/2019
-
6. Morse taper performance: A finite element analysis study
OBJECTIVES: To evaluate and compare the magnitude and distribution of stresses generated on implants, abutments and first molar metal-ceramic crowns using finite element analysis. METHODS: Preliminary three-dimensional models were created using the computer-aided design software SolidWorks. Stress and strain values were observed for two distinct virtual mo
Clinics. Publicado em: 25/03/2019
-
7. 3-D finite element analysis of the effects of post location and loading location on stress distribution in root canals of the mandibular 1st molar
Abstract Objective The purpose of this study was to evaluate, by using finite element analysis, the influence of post location and occlusal loading location on the stress distribution pattern inside the root canals of the mandibular 1st molar. Material and Methods Three different 3-D models of the mandibular 1st molar were established: no post (NP) – a
J. Appl. Oral Sci.. Publicado em: 08/02/2018
-
8. Rolling Contact Fatigue Life of Rail for Different Slip Conditions
Abstract A three-dimensional elastic-plastic finite element analysis (FEA) is carried out to estimate the rolling contact fatigue (RCF) crack initiation life for varied slip range on the rail arising from operational variations. The wheel load produces Hertzian contact pressure. Variation in engine traction induces slip variations that evolves thermal load i
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
9. Evaluation of Stress Distribution in Endodontically Weakened Teeth Restored with Different Crown Materials: 3D-FEA Analysis
Resumo Este estudo avaliou a distribuição de tensão em dentes tratados endodonticamente, fragilizados (F) ou não fragilizados (NF), restaurados com diferentes materiais para a coroa protética utilizando 3D-FEA. Modelos de um canino maxilar foram construídos baseados em imagens de micro-CT e divididos em grupos: G1 (controle) - dente hígido; G2 a G7 -
Braz. Dent. J.. Publicado em: 2017-12
-
10. Comparison of short-segment monoaxial and polyaxial pedicle screw fixation combined with intermediate screws in traumatic thoracolumbar fractures: a finite element study and clinical radiographic review
OBJECTIVES: No studies have compared monoaxial and polyaxial pedicle screws with regard to the von Mises stress of the instrumentation, intradiscal pressures of the adjacent segment and adjacent segment degeneration. METHODS: Short-segment monoaxial/polyaxial pedicle screw fixation techniques were compared using finite element methods, and the redistribute
Clinics. Publicado em: 2017-10
-
11. Effect of Occlusal Splints on the Stress Distribution on the Temporomandibular Joint Disc
Resumo Abordagens conservadoras, incluindo o uso de placas oclusais, são as primeiras opções de tratamento para disfunção temporomandibular (DTM), devido à sua reversibilidade. O presente estudo analisou o efeito da posição do disco articular e do uso de placa oclusal na distribuição de tensões no disco. Um modelo bidimensional (2D) de articulaç�
Braz. Dent. J.. Publicado em: 2017-06
-
12. Finite Element Investigation of Performance of Composite-Steel Double Lap Adhesive Joint Under Tensile Loading
Abstract Parametric study of composite-steel double lap joint under tensile loading is performed using finite element modeling. The joint is such that steel is placed between a straight and a curved composite sublaminate. Three joint characteristics including maximum Von Mises stress in adhesive layer, stiffness and weight are investigated. Design curves are
Lat. Am. j. solids struct.. Publicado em: 2017-02