Wc Co
Mostrando 1-12 de 69 artigos, teses e dissertações.
-
1. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
2. Efeitos do Processo de Refusão a Laser na Microestrutura e No Comportamento de Desgaste do Revestimento de WC Aspergido com HVOF
RESUMO O desgaste de componentes e equipamentos industriais e agrícolas representa um grande fator de depreciação de capital e de fonte de despesas com manutenção e reposição de componentes mecânicos. Como o desgaste é um fenômeno essencialmente superficial, envolvendo a remoção mecânica indesejável de material de superfícies, a solução estu
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Avaliação tribológica de óleos hidráulicos biodegradável e mineral com deslizamento entre as ligas de Cu-Zn e WC-CoCr
RESUMO A correta seleção dos óleos lubrificantes e das superfícies de contato melhoram o desempenho e reduzem o consumo de energia das máquinas Por isso, a engenharia de superfícies propõe novos revestimentos aos quais seu comportamento tribológico combinado com o uso de óleos biodegradáveis em componentes de sistema hidráulicos, não são conheci
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Study of the metallurgical bond between 316 steel substrates and NiCrAlY coating sprayed by HVOF and irradiated with a low power CO2 laser
RESUMO Considerando a importância do desenvolvimento de novos materiais ao longo dos últimos anos; os pesquisadores vêm estudando soluções eficazes através do uso de revestimentos de alta dureza para aplicação em ferramentas de corte e matrizes de conformação. Revestimentos de carboneto de tungstênio (WC) são um dos mais utilizados em sistemas de
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Heritability estimation and genetic correlations for mature weight, visual scores, and growth traits in Nellore cattle
ABSTRACT This study was intended to estimate the genetic associations between growth traits and visual scores with possible changes in mature weight (MW) in 397,900 Nellore animals. A bi-character analysis was performed to estimate the (co)variances and genetic parameters for MW, which comprises the following traits: conformation, finishing precocity, muscul
R. Bras. Zootec.. Publicado em: 10/06/2019
-
6. Effects of Bacillus subtilis biocementation on the mechanical properties of mortars
Resumo Este estudo tem como objetivo avaliar a influência da adição de esporos de B. subtilis AP91 nas propriedades mecânicas de argamassas. Para tanto, a bactéria B. subtilis AP91 isolada de folhas de arroz da variedade agulha precoce foi utilizada na concentração de 105 esporos/mL em argamassas com traço de 1:3 (em massa) e relação água/cimento
Rev. IBRACON Estrut. Mater.. Publicado em: 2019-02
-
7. Effect of Experimental Parameters on Wear Response of Thermally Sprayed Carbide Based Coatings
Friction and abrasive wear response of WC-12 Co and Cr3C2-25 NiCr coatings was studied. Abrasive wear experiments were conducted with SiC abrasive particles with varying load and sliding speeds. The results were analyzed using SEM, XRD and XPS observations of worn surfaces, wear debris and worn out abrasive paper. Friction coefficient diminished with rise in
Mat. Res.. Publicado em: 08/11/2018
-
8. Effect of Bead Overlapping on the Microstructure and Mechanical Properties of CoCrWC Alloy Coatings
In order to protect industrial components, cobalt base alloys are applied as hardfacing material through welding techniques. A large number of papers have shown that controlling the chemical composition is a key point regarding the wear and corrosion resistance of coatings. This paper investigated the effect of bead overlapping on the microstructure and prop
Mat. Res.. Publicado em: 17/09/2018
-
9. HVOF-sprayed Coating Over AISI 4140 Steel for Hard Chromium Replacement
The replacement of electrolytic hard chrome (EHC) by high velocity oxy-fuel (HVOF) sprayed coatings is investigated due to the toxicity of EHC process. The wear behavior of AISI 4140 steel coated by HVOF-, EHC-process was compared to quenched and tempered (Q&T) steel using a pin-on-disc apparatus. The wear tests were conducted at room temperature, 10 N appli
Mat. Res.. Publicado em: 28/05/2018
-
10. Estudo da obtenção do Regime Permanente de Desgaste em ensaios de desgaste micro-abrasivo por esfera rotativa conduzidos em corpos-de-prova de WC-Co P20 e aço-ferramenta M2
RESUMO Desde a sua inserção junto à comunidade científica de tribologistas, o ensaio de desgaste micro-abrasivo por esfera rotativa vem sendo adotado por renomadas universidades e centros de pesquisas. Neste tipo de experimento, um fenômeno tribológico importante que deve ser observado e, considerado, refere-se à obtenção do Regime Permanente de Des
Matéria (Rio J.). Publicado em: 05/03/2018
-
11. Improving Nutrition Utilization and Meat Quality of Broiler Chickens Through Solid-State Fermentation of Agricultural By-Products by Aureobasidium Pullulans
ABSTRACT A 35 d trial was conducted to evaluate the effects of dietary supplementation of co-fermented agricultural by-products, soybean hulls and Pleurotus eryngii stalk residue (PESR), with Aureobasidium pullulans on nutrients digestibility and meat quality in broilers fed on conventional corn-soybean meal basal diet. A total of 400 1-d-old Ross broilers w
Rev. Bras. Cienc. Avic.. Publicado em: 2017-12
-
12. The Effect of Cr3C2 and TaC Additives on Microstructure, Hardness and Fracture Toughness of WC-6Co Tool Material Fabricated by Spark Plasma Sintering
Spark plasma sintering has been used to successfully produce WC-6Co-xCr3C2, WC-6Co-xTaC (x = 0.2, 0.6, 1.0) and WC-6Co-xCr3C2-xTaC (x = 0.1, 0.3, 0.5) cemented carbides. The spark plasma sintered compacts were investigated by scanning electron microscopy, hardness tests and fracture toughness tests. The results were compared to an additives-free WC-6Co cemen
Mat. Res.. Publicado em: 11/05/2017