Wet Combustion
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. Halogen Determination in Polymeric Waste of Electrical and Electronic Equipment: Overcoming Limitations in Sample Preparation
Sample preparation of polymers for halogen determination requires special attention because they are difficult to bring into solution and due to the risk of analyte losses when using acid digestion. A method using microwave-induced combustion (MIC) was optimized for accurate determination of halogens in polymeric parts obtained in waste of electrical and ele
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
2. Energy budgets for juvenile Pacific whiteleg shrimp Litopenaeus vannamei fed different diets
Abstract Energy budgets for juvenile Pacific whiteleg shrimp, Litopenaeus vannamei (1.7-4.0 g ) fed with different diets were assessed. The energy partitioning between growth, respiration, ammonia excretion, feces and exuvia was calculated to estimate for total food energy intake. Shrimp oxygen consumption and ammonia excretion were quantified in sealed cham
Braz. j. oceanogr.. Publicado em: 13/06/2019
-
3. Harmonious interaction of incorporating CNTs and zeolitic imidazole frameworks into polysulfone to prepare high performance MMMs for CO 2 separation from humidified post combustion gases
Abstract Multi-walled carbon nanotubes (CNTs) and zeolitic imidazole frameworks (ZIF-301) were synergistically incorporated into glassy polysulfone (PSF) to prepare mixed-matrix membranes (MMMs) to separate CO2 from post combustion flue gas. The flexible MMMs rendering consistent distribution and improved adhesion of nanofillers with the polymer matrix were
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
4. DETERMINAÇÃO SIMULTÂNEA DE METAIS E ENXOFRE POR ICP-OES EM RESÍDUOS DE DESTILAÇÃO DE PETRÓLEO
A method for digestion of crude oil distillation residues (atmospheric residue, AR and vacuum residue, VR) using microwave-induced combustion (MIC) was developed for simultaneous determination of metals (Ba, Co, Fe, Mg, Mn, Ni and V) and sulfur by inductively coupled plasma optical emission spectrometry (ICP-OES). Samples were wrapped in polyethylene films a
Quím. Nova. Publicado em: 2016-11
-
5. Methods of soil organic carbon determination in Brazilian savannah soils
Several methods exist for determining soil organic carbon, and each one has its own advantages and limitations. Consequently, a comparison of the experimental results obtained when these methods are employed is hampered, causing problems in the comparison of carbon stocks in soils. This study aimed at evaluating the analytical procedures used in the determin
Sci. agric. (Piracicaba, Braz.). Publicado em: 2014-08
-
6. DETERMINAÇÃO DE ELEMENTOS TRAÇO EM SOLO POR ICP-MS APÓS VOLATILIZAÇÃO EMPREGANDO COMBUSTÃO INICIADA POR MICRO-ONDAS
In this work the microwave-induced combustion (MIC) method was proposed for the decomposition of soil samples and subsequent determination of As, Bi, Cd, Hg, Pb and Se by inductively coupled plasma mass spectrometry (ICP-MS). Soil samples (up to 300 mg) were mixed with microcrystalline cellulose (300 or 500 mg), homogenized and pressed as pellets. Pellets we
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
7. Estudo experimental da combustão molhada na recuperação de oleo pesado / Experimental study of the wet combustion on heavy oil recovery
One way to improve the performance of the oil recovery method, known as dry forward in situ combustion, is to inject water either simultaneously or intermittently with the air, named as wet forward in situ combustion. The specific heat of the dry air is considerably lower than that of water, such that water may render a better transport of the heat generated
Publicado em: 2010
-
8. APLICAÇÃO DA AMOSTRAGEM DIRETA-GF AAS PARA A DETERMINAÇÃO DE ELEMENTOS TRAÇO EM METÉRIAS-PRIMAS PARA A PRODUÇÃO DE POLIURETANOS
Polymeric diphenylmethane diisocyanate (PMDI) and diphenylthane dianiline (MDA) are importante raw materials in the manufacture of polyurethanes. These products have wide application in various fields such as medicine, catalysis and electronics. Actually, considerable interest has been given for the presence of metal contaminants in raw materials for the pro
Publicado em: 2010
-
9. Comparison of carbon and nitrogen determination methods for samples of apaleudult subjected to no-till cropping systems / Comparação de métodos de determinação de carbono e nitrogênio em amostras de argissolo sob plantio direto
Resultados de concentração de carbono (C), obtidos pelo método Walkley-Black, e resultados de concentração de nitrogênio (N) total, determinados pelo método Kjeldahl, foram comparados com os correspondentes resultados de C e N obtidos pelo método de combustão seca (analisador Elementar Vario EL), utilizando-se amostras de dez camadas de um Argissolo
Publicado em: 2010
-
10. Avaliação dos constituintes e do potencial mutagênico do material particulado oriundo do beneficiamento artesanal da castanha do caju / Assessment of the components and mutagenic potential of particulate matter from artisanal cashew nut roasting
x Despite the social and economic importance of the processing of cashew nuts to Rio Grande do Norte, the production is still carried out artisanally. To collect the almond nut is necessary to roasting. The smoke generated during the burning of the nut has high concentrations of particulate matter (PM) and the PM produced is inhaled daily by families for a p
Publicado em: 2010
-
11. Catalisadores de Pt suportados, obtidos pelo método solgel : efeito do cério na atividade e estabilidade nas reações de reforma do metano
The effect of Ce as a structural and electronic promoter on the activity and stability of Pt catalysts supported on Al2O3 for methane reforming reactions were investigated to elucidate the metal-support interaction. Pt/Al2O3 and Pt/CeO2-Al2O3 catalysts were prepared by conventional method of wet impregnation on commercial supports and on CeO2- Al2O3 mixed ox
Publicado em: 2009
-
12. DETERMINAÇÃO DE CLORETO POR CROMATOGRAFIA DE ÍONS EM PETRÓLEO EXTRAPESADO, COQUE E RESÍDUO DE VÁCUO APÓS DECOMPOSIÇÃO EM SISTEMA FECHADO POR COMBUSTÃO INICIADA POR MICROONDAS
A method for chloride determination in heavy crude oil, petroleum coke and vacuum residue after microwave-induced combustion (MIC) in closed vessels is described. Samples (with exception of petroleum coke) were wrapped in polyethylene and placed on a quartz holder that was positioned inside to quartz vessels used in commercial system for sample digestion by
Publicado em: 2007