Wet Welding
Mostrando 1-9 de 9 artigos, teses e dissertações.
-
1. Investigação do Fenômeno das Bolhas em Soldagem Subaquática Molhada com Arame Tubular Autoprotegido
Resumo O fenômeno de formação de bolhas está fortemente ligado a variação dos sinais elétricos e estabilização do arco de solda na soldagem subaquática molhada com arame tubular (FCAW). O bom entendimento desses fenômenos pode ser usado para uma melhor otimização dos parâmetros de soldagem e consequentemente uma melhoria na qualidade final da
Soldag. insp.. Publicado em: 15/08/2019
-
2. Evaluation of the Effect of the Water in the Contact Tip on Arc Stability and Weld Bead Geometry in Underwater Wet FCAW
Abstract: Underwater wet flux cored arc welding – FCAW – is an important process employed to repair marine structures with the advantages of not handling the components off the water and offers higher productivity in comparison to other conventional welding process. Under the water, wet welding activities are performed with lower stability, due to the pr
Soldag. insp.. Publicado em: 2017-10
-
3. Fracture Toughness and Charpy CVN Data for A36 Steel with Wet Welding
Abstract This study presents KIC data obtained from KIC-CVN correlations from Charpy CVN values. For this study, T-welded connections were manufactured from ASTM A36 and E6013 electrodes in dry conditions. Then, a rectangular grinding at the weld toe was carried out and filled with wet welding. Charpy specimens were extracted to obtain CVN values. An exhaust
Soldag. insp.. Publicado em: 2017-09
-
4. Consideraciones termodinámicas entre la formación de poros y la presión hidrostática durante la soldadura subacuatica mojada
The pores and cracks formations in weld bead during underwater wet welding are the main cause that prevent to reach the required mechanical properties of the weld metal. These defects are closely associated with the decomposition of the water molecule under conditions of electric arc. In this paper the thermodynamic calculations of the complex process of the
Soldagem & Inspeção. Publicado em: 2009-06
-
5. NI ALLOYED WELD METALS WITH ADDITIONS OF CU AND MO FOR UNDERWATER WET WELDING / METAIS DE SOLDA LIGADOS AO NI COM ADIÇÕES DE CU E MO PARA SOLDAGEM SUBAQUÁTICA MOLHADA
Este trabalho foi desenvolvido com o objetivo de melhorar as propriedades mecânicas dos metais de solda produzidos por eletrodos oxidantes com níquel, juntamente com adições de cobre e de molibdênio, através do refino de grão ou do endurecimento por solução sólida. Os eletrodos oxidantes se caracterizam por apresentar menores teores de hidrogênio
Publicado em: 2009
-
6. EVALUATION OF THE EFFECTS OF REPLACEMENT OF HEMATITE BY WUSTITE ON OXIDIZING ELECTRODES COATING FOR UNDERWATER WET WELDING / AVALIAÇÃO DOS EFEITOS DA SUBSTITUIÇÃO DE HEMATITA POR WUSTITA NO REVESTIMENTO DE ELETRODOS OXIDANTES PARA SOLDAGEM SUBAQUÁTICA MOLHADA
A soldagem subaquática molhada é uma das técnicas utilizadas no reparo de plataformas submarinas para extração de petróleo e gás, tendo uma grande expansão no mundo atual. Sua maior vantagem frente a outros processos de soldagem se deve a sua simplicidade e facilidade de mobilização, já que permite ao mergulhador trabalhar diretamente sobre as par
Publicado em: 2009
-
7. EFFECT OF OXIDIZING ELECTRODES AND POLARITY ON HYDROGEN MITIGATION IN UNDERWATER WET WELDING
Weld metal hydrogen pickup in underwater wet welding is unavoidable due to the presence and dissociation of water vapor surrounding the welding arc. In conjunction with the fast quenching nature of the water environment, the high hydrogen content in the weldment leads to hydrogen cracking in the heat-affected zone. This undesirable occurrence has been succes
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/05/1997
-
8. ANALYSIS AND MODELING OF WET WELDS FATIGUE PROPERTIES / ANÁLISE E MODELAGEM DE PROPRIEDADES MECÂNICAS Á FADIGA DE SOLDAS MOLHADAS
The trend currently observed in the oil exploration industry is prodominantly geared towards the development of low-cost repair techniques. An example of this trend is the wet welding process used used in underwater repairs, at considerably lower costs that those incurred when using the traditional dry hyperbaric welding system. The objective of this work is
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/04/1995
-
9. Maintenance of stellite and tungsten carbide saw tips: respiratory health and exposure-response evaluations.
OBJECTIVE--To study exposure to cobalt and chromium in saw maintenance rooms and test respiratory health among saw filers at lumber mills. Hard-metal lung disease is associated with cobalt in the manufacture of tungsten carbide tools; recently it has also been reported among tool maintenance workers. Lumber mills often use saws tipped with tungsten carbide o