Work Load
Mostrando 1-12 de 891 artigos, teses e dissertações.
-
1. Experimental Loss Segregation in a Solid Rotor Induction Motor
Abstract Solid rotor induction motors (SRIMs) are asynchronous motors suited for high speed applications. This work presents an experimental case study where standard loss segregation procedures for induction motors are performed with a two-phase smooth solid rotor induction motor in order to verify their applicability. Even though the machine is supposed to
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Efficient Low-Complexity Optimized Channel Estimating Methods for OFDM-Based Low-Voltage Broadband Power Line Communication Systems
Abstract Broadband Power Line Communication (BB-PLC) technology enables data transmission for smart grid applications. Nevertheless, channel equalizers are required in the receiver to estimate and compensate for the nonlinear time-variant impulse response and noise interference effects introduced by the BB-PLC channel. In this paper, we append the Particle S
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Settlement of bored piles with expander body system in lateritic soils
Abstract The Expander Body pile (EB) is a combination of a cast-in-situ pile method with an inflated, pump-grouted tip. The EB system's pioneering conjunction with the conventional drilling pile technique has improved work load, foundation security, cost reductions and abrupt displacements in lateritic, porous, unsaturated soils. The aim of this article is t
REM, Int. Eng. J.. Publicado em: 2021-09
-
4. DESIGN AND IMPLEMENTATION OF FLC APPLIED TO A SMART GREENHOUSE
ABSTRACT Greenhouse cultivation needs an accurate modelling and an optimised control system to ensure an adequate microclimatic condition for plants. It represents a complex task due to the high number of input factors. For this reason, an improved intermediate modelling was established under the platform of the MATLAB/Simulink environment to simulate the en
Eng. Agríc.. Publicado em: 2020-12
-
5. High Efficiency Continuous Inverse Class-F Power Amplifier with Modified Current Waveform
Abstract Continuous inverse class-F (CICF) is a recent mode of harmonically-tuned RF power amplifiers used to extend the operating bandwidth of the conventional narrowband class-F−1 power amplifier by producing variable set of drain current waveforms and load admittances that give the same operating efficiency. In this work, a new approach of analysis is d
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
6. The Covid-19 pandemic seen from the frontline
ABSTRACT COVID-19 disease caused by infection with the SARS-CoV-2 virus produces respiratory symptoms, predominantly of the upper airways, which can progress to pneumonia after 7 days with persistent fever, cough and dyspnea, and even develop a syndrome of acute respiratory distress (ARDS), multi-organ failure and death. Since COVID-19 disease was declared b
Int. braz j urol.. Publicado em: 2020-07
-
7. Electromagnetic Energy Harvesting Using a Glass Window
Abstract In this work, a new constructive and conceptual model for rectenna, using glass as dielectric substrate, was proposed. This research aims to produce a window for building facades that can harvest the electromagnetic energy available in the environment. For this proposal, a slotted patch antenna was designed with two main objectives: to have a low va
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-03
-
8. Analysis and Optimization of Ultra-Low-Power Rectifier with High Efficiency for Applications in Wireless Power Transmission and Energy Harvesting
Abstract The system capable of harvesting RF energy from the environment through an antenna and converting it into direct current energy to deliver to a load is known as rectenna. The rectifier circuit is an important part of the rectenna and its modeling is arduous since it employs a non-linear device working at extremely low power levels. In addition, ther
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-03
-
9. 3D numerical investigation of mixture formation and combustion in a DISI engine at part-load under stratified operation
This work investigates through numerical simulation, the operation of a big bore direct fuel injection spark ignition engine, at part load under stratified operation. It evaluates fuel-air mixture preparation and combustion process with the adoption of detailed chemical kinetics mechanisms for both Isooctane and Ethanol, and applying adaptive mesh refinement
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2020
-
10. Análise da resistência de placas ósseas de acrílico fabricadas a laser quando submetidas a diferentes forças que agem sobre o foco de fratura
RESUMO Objetivou-se com este trabalho analisar a resistência de placas ósseas de acrílico, confeccionadas com cortadora a laser CO2, quando submetidas às forças que agem sobre o foco de fratura. Foram utilizados 40 fêmures de ovinos (Ovis aries) e confeccionadas 40 placas de acrílico, os quais foram avaliados em grupos: grupo OP - foram avaliados 20 o
Arq. Bras. Med. Vet. Zootec.. Publicado em: 13/12/2019
-
11. Reliability-based calibration of Brazilian structural design codes used in the design of concrete structures
Resumo Este artigo apresenta a calibração, baseada em confiabilidade, dos coeficientes parciais de segurança das normas brasileiras utilizadas no dimensionamento de estruturas de concreto. O trabalho está fundamentado na teoria de confiabilidade, que permite uma representação explícita das incertezas envolvidas em termos das resistências e ações. N
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
12. Numerical analysis of torsional tangent rigidity of reinforced concrete waffle slab
Resumo Este trabalho de investigação científica aborda a análise da rigidez tangente à torção de lajes nervuradas de concreto armado por meio de comparações da análise numérica com resultados de ensaios experimentais, cujo cálculo foi feito no programa ATENA. Tal programa foi desenvolvido especialmente para cálculo de estruturas de concreto arma
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019