X Ray Equipment
Mostrando 1-12 de 73 artigos, teses e dissertações.
-
1. DESENVOLVIMENTO DE ACESSÓRIO PORTÁTIL DE CONTROLE DE TEMPERATURA PARA MEDIDAS ESPECTROSCÓPICAS
Temperature is a natural phenomenon that may modify the structure of chemical compounds and hence their properties. We aimed to develop a simple portable system based on the Peltier principle for spectral characterization of compounds with temperature-dependent structure. The device was constructed and adapted to three pieces of equipment: X-ray diffractomet
Química Nova. Publicado em: 2022
-
2. DETERMINAÇÃO DE FÓSFORO EM PALEOSSEDIMENTOS EMPREGANDO ESPECTROMETRIA DE FLUORESCÊNCIA DE RAIOS-X PORTÁTIL
Phosphorus (P) is an important chemical marker of the past human presence, because, besides indicates the localization of possible archaeological sites, also, contributes to clarify doubts regarding to origin, duration and to specific functions that were developed in them. The present study aimed to obtain a simple, accurate, fast and non-destructible analyt
Quím. Nova. Publicado em: 2021-02
-
3. Influência da composição do gás de proteção nas tensões residuais de juntas de aço DP600 soldadas pelo processo GMAW
RESUMO A indústria automobilística vem investindo em novos processos de fabricação que melhoram a produtividade sem perda da qualidade. Entretanto, a presença de tensões residuais, geradas em todos os processos de fabricação, constitui um dos grandes problemas encontrados na indústria metal mecânica, pois estas podem se somar às tensões de carreg
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Presence of iron in polymers extruded with corrosive contaminants or abrasive fillers
Abstract Off-site measurements of the dimensions of extruder screws are used to monitor their wear. This wear causes the presence of metals in the processed polymer. We detected the presence of iron in polymers processed with corrosive contaminants or abrasive fillers. To this end we processed poly(ethylene terephthalate), PET, pure or contaminated with poly
Polímeros. Publicado em: 10/06/2019
-
6. Influência da composição do gás de proteção nas tensões residuais de juntas de aço DP600 soldadas pelo processo GMAW
RESUMO A indústria automobilística vem investindo em novos processos de fabricação que melhoram a produtividade sem perda da qualidade. Entretanto, a presença de tensões residuais, geradas em todos os processos de fabricação, constitui um dos grandes problemas encontrados na indústria metal mecânica, pois estas podem se somar às tensões de carreg
Matéria (Rio J.). Publicado em: 20/05/2019
-
7. X-ray microtomography in comparison to radiographic analysis of mechanically damaged maize seeds and its effect on seed germination
ABSTRACT. Among the most relevant aspects of seed production, mechanical damage may affect seed germination and reduce health and vigor. This study introduces a noninvasive high-resolution imaging procedure for evaluating the mechanical damage to maize seeds and the effects on seed germination. Seeds with different levels of mechanical damage were evaluated
Acta Sci., Agron.. Publicado em: 28/03/2019
-
8. Caracterización del comportamiento frente a la corrosión en soldaduras de recargue de aceros inoxidables superdúplex
ABSTRACT Superduplex stainless steels have a dual structure constituted approximately by 50% of ferrite and 50 % of austenite. This fact produces a good combination of mechanical properties and corrosion resistance. Thanks to these features their use is growing, mainly in the industries of paper, chemical, gas and oil. Surfacing welding is used for the manuf
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Evolución microestructural in-situ a alta temperatura de depósitos de soldadura de aceros 9Cr con diferentes contenidos de boro
ABSTRACT New alloys have been developed for enhancing the performance of the equipment used in thermoelectric power generation industry. With the objective of increasing the creep resistance of these materials, changes in the content of some microalloying elements were carried out. Boron bearing in creep strength enhanced 9Cr steel (CSE9Cr) welds improved ma
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Evaluation of the Influence of Surface Finishing on the Corrosion Resistance of HVOF Applied Inconel 625 Coatings on Steel
In this work, the corrosion resistance of Inconel 625 coatings applied to AISI 4140 steel plates was evaluated. Coatings were produced by High Velocity Oxygen Fuel (HVOF) by use of two different equipment which use either kerosene (liquid) or propane (gas) as fuel. The resulting coatings were evaluated in two conditions: as-deposited and after a surface fini
Mat. Res.. Publicado em: 18/12/2017
-
11. Nondestructive characterization of epoxy matrix composites reinforced with Luffa lignocellulosic fibers
ABSTRACT Luffa Cylindrica is a tropical plant from the Cucurbitaceae family, whose fruit becomes very fibrous when fully ripened. The lignocellulosic sponges of Luffa can be suitable for use as reinforcement of epoxy matrix composites, because they have a morphology with spatial 3-D arrangement as well as are eco-friendly materials (biodegradable, and high a
Matéria (Rio J.). Publicado em: 20/07/2017
-
12. Automated and observer based light field indicator edge evaluation in diagnostic X-ray equipment
Abstract Introduction To analyze edge detection and optical contrast calculation of light field-indicators used in X-ray via automated- and observer-based methods, and comparison with current standard approaches, which do not give exact definition for light field edge determination. Methods Automated light sensor array was used to measure the penumbra zone
Res. Biomed. Eng.. Publicado em: 2017-06