X Ray Film
Mostrando 1-12 de 245 artigos, teses e dissertações.
-
1. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
2. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
3. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
4. Incorporation of Fluorescent Dyes in Electrospun Chitosan/Poly(ethylene oxide)
Polymeric films have been increasingly investigated due to the ease of miniaturization and integration in several sensor devices. Films obtained from the electrospinning technique have a controlled diameter and homogeneity, and substances can be incorporated into the polymeric network. Electrospinning fiber of chitosan (Ch) and poly(ethylene oxide) (PEO) was
J. Braz. Chem. Soc.. Publicado em: 2021-05
-
5. Tear down academic paywall during pandemic
Zinc hexacyanoferrate (ZnHCF) is a Prussian Blue analog and can be intercalated by both monovalent and divalent ions. ZnHCF/multi-walled carbon nanotube (MWCNT) film could be used as a cathode for zinc ions battery. Carbon nanotubes improved significantly the electrochemical performance of the electrode. It is described the preparation of ZnHCF/MWCNT films b
Braz. J. Biol.. Publicado em: 2020-09
-
6. Zinc Hexacyanoferrate/Multi-Walled Carbon Nanotubes Films for Rechargeable Aqueous Batteries
Zinc hexacyanoferrate (ZnHCF) is a Prussian Blue analog and can be intercalated by both monovalent and divalent ions. ZnHCF/multi-walled carbon nanotube (MWCNT) film could be used as a cathode for zinc ions battery. Carbon nanotubes improved significantly the electrochemical performance of the electrode. It is described the preparation of ZnHCF/MWCNT films b
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
7. Structural and Functional Stabilization of Sericin from Bombyx mori Cocoons in a Biopolysaccharide Film: Bioorigami for Skin Regeneration
Development and optimization of a bioorigami film with silk sericin was pursued for skin regeneration. Several formulations were produced, with varying integrated sericin contents, viz. 0, 1, 2, 5, 10, 20 and 50 mgsericin mLfilm-1. The physico-chemical characteristics of the bioorigami films produced were evaluated via infrared spectrophotometry, X-ray diffr
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
8. Optimization and release evaluation for tea polyphenols and chitosan composite films with regulation of glycerol and Tween
Abstract In order to optimize the performance of chitosan-tea polyphenols composite films, effects of glycerol and Tween on the antioxidative activities and physical performance of chitosan composite films were evaluated. The results indicated that both flexibility and water vapour permeability of chitosan/tea polyphenols films were improved with the additio
Food Sci. Technol. Publicado em: 2020-03
-
9. Effect of High-pressure Torsion on Corrosion Behavior of a Solution-treated Al-Mg-Sc Alloy in a Saline Solution
The effect of the increase in crystalline defects in the structure generated by high-pressure torsion (HPT) on the corrosion behavior of metallic materials is not well understood. This report evaluates the influence of HPT on the corrosion behavior of a solution treated Al-3wt% Mg-0.2wt% Sc alloy in a 3.5 wt./v.% NaCl solution. The electrochemical behavior o
Mat. Res.. Publicado em: 04/11/2019
-
10. Influence of the Pre-Treatments and Process Temperature on the Adhesion of TiN Films Deposited by PBII&D Over Nitrided Austenitic Stainless Steel
In this work the influence of pre-treatment cleaning processes in the adhesion of TiN films deposited by the plasma based ion implantation and deposition (PBII&D) process over plasma nitrided AISI 316L stainless steel was investigated, varying the gas composition, the duration of the sputtering process and the temperature in the same deposition chamber. The
Mat. Res.. Publicado em: 28/10/2019
-
11. Facile One-Step Electrodeposition Fabrication of Amorphous MoS2 Catalysts in Titanium for Hydrogen Evolution Reaction
Hydrogen is seen as a future energy carrier that will assist the global energy fuel demand. However, it is still necessary to study efficient and inexpensive catalysts that can be used on a large scale to make this technology practical. In this paper the electrodeposition of molybdenum disulfide (MoS2) film on titanium (Ti) substrate was performed by cyclic
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
12. The influence of Cu content on high temperature corrosion behavior of heat - resistant molten salt steel
ABSTRACT This work studies the high temperature corrosion behavior of new heat-resistant steel with salt coating method of 75%Na2SO4+25%NaCl coating on the steel surface at 700ºC. The chemical composition of corrosion products and surface morphology of the corrosion layer were analyzed using X-ray diffractometer (XRD), scanning electron microscopy (SEM), en
Matéria (Rio J.). Publicado em: 16/09/2019