Zinc Alloy
Mostrando 1-12 de 31 artigos, teses e dissertações.
-
1. Evaluation of zinc-oxide nanocoating on the characteristics and antibacterial behavior of nickel-titanium alloy
RESUMO Objetivos: Avaliar o efeito do nanorrevestimento de óxido de zinco (ZnO) sobre as propriedades mecânicas e propriedades antibacterianas de fios ortodônticos de NiTi. Métodos: Fios 0,016” x 0,022” de NiTi foram revestidos com nanopartículas de ZnO por meio de um método de deposição eletroquímica com um sistema de três eletrodos a 0,1M
Dental Press J. Orthod.. Publicado em: 2020-08
-
2. Corrosion Behavior of AA7075-T73 Aluminum Alloy During Machining of Aeronautical Components
Corrosion of AA7075-T73 aluminum alloy during machining process was studied. An experimental device was proposed in order to simulate machining procedure. A design of experiments - DOE was used in order to evaluate what process parameter is significant. Some electrochemical tests based on open-circuit potential vs time measurements and potentiodynamic polari
Mat. Res.. Publicado em: 01/07/2019
-
3. Performance and Surface Integrity of Wire Electrical Discharge Machining of Thin Ti6al4v Plate Using Coated and Uncoated Wires
Wire Electrical Discharge Machining (WEDM) is one of the most important production technologies to manufacture very accurate small components and tools on any electrical conductive material. Titanium and its alloys have been widely used in automobile and aerospace industry as well as in medical engineering field. Small components and tools with complex geome
Mat. Res.. Publicado em: 03/06/2019
-
4. Investigação da corrosão eletrolítica em telhas de aço recobertas com zincalume
RESUMO As telhas de aço usadas em galpões de fazendas expostas às intempéries ficam vulneráveis à degradação. A corrosão surge devido à diferença de potencial elétrico entre a superfície metálica e o meio, levando a um carregamento elétrico dessa superfície. Elas então necessitam da proteção de um recobrimento anticorrosivo, cujo objetivo
Matéria (Rio J.). Publicado em: 20/05/2019
-
5. Movimiento de las interfases durante la solidificación horizontal de aleaciones estaño-zinc
ABSTRACT Solidification processing is one of the important routes to produce materials, especially metals and alloys. The parameters for the transformation from liquid to solid, such as the temperature gradient, the growth rate, the cooling rate, the interphase velocity, vary from process to process and in one process also as a function of time and space. Th
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Band Structure, Charge Distribution and Optical Properties of AlPxSb1-x Ternary Semiconductor Alloys
The present contribution studies on the composition dependence of the electronic and optical properties of the zinc-blende alloy system AlPxSb1-x. The calculations are performed using a pseudopotential approach under the virtual crystal approximation. Features such as electronic band structure, energy band-gaps, refractive index, dielectric constants and val
Mat. Res.. Publicado em: 21/05/2018
-
7. Determinación del módulo de Young de una barra cilíndrica
The following work makes use of smartphones in order to determine the elasticity modulus or Young's modulus of a cylindrical brass bar (copper-zinc alloy), employing two different devices: A microphone, to determine the components frequencies of the bar's oscillation, which is compressed at one end and free at the other, and an accelerometer to calculate osc
Rev. Bras. Ensino Fís.. Publicado em: 19/10/2017
-
8. Determination of Traces of Ni, Cu, and Zn in Wastewater and Alloy Samples by Flame-AAS after Ionic Liquid-Based Dispersive Liquid Phase Microextraction
A procedure has been developed for simultaneous separation/preconcentration of copper, nickel, and zinc based on in situ ionic liquid-based dispersive liquid-liquid microextraction method as a prior step to their determination by flame atomic absorption spectrometry. The analytes reacted with sodium diethyl dithiocarbamate at pH 7 to form hydrophobic chelate
J. Braz. Chem. Soc.. Publicado em: 2017-05
-
9. Statistic evaluation of cysteine and allyl alcohol as additives for Cu-Zn coatings from citrate baths
In the present work, cysteine and allyl alcohol were added to citrate baths as additives to Cu-Zn coatings on steel substrates. In order to verify the effects of the deposition parameters (current density, mechanical stirring speed, and additives) on the coating composition, electrochemical behavior, morphology, and microstructure properties of Cu-Zn coating
Mat. Res.. Publicado em: 18/12/2012
-
10. Influence of core-finishing intervals on tensile strength of cast posts-and-cores luted with zinc phosphate cement
The core finishing of cast posts-and-cores after luting is routine in dental practice. However, the effects of the vibrations produced by the rotary cutting instruments over the luting cements are not well-documented. This study evaluated the influence of the time intervals that elapsed between the cementation and the core-finishing procedures on the tensile
Brazilian Oral Research. Publicado em: 2012-08
-
11. Um método para avaliar a taxa de corrosão
In this paper it is proposed an indirect method to evaluate the corrosion rate of an aluminum and zinc alloy in alkaline solution by using a well-known device for collecting gases over water. The hydrogen gas formation, a corrosion product, is monitored at different time intervals and associated with the alloy mass loss. It has been suggested that the studen
Química Nova. Publicado em: 2011
-
12. Crescimento de nanofios auto-sustentados de arseneto de índio por epitaxia por feixes moleculares
This Thesis reports the experimental and theoretical works related to the growth and characterization of free-standing gallium indium arsenide nanowires grown by Molecular Beam Epitaxy (MBE). The growth mechanisms of free-standing nanowires remain barely known and explored in its fundamental aspects. The theoretical models of the formation of free-standing n
Publicado em: 2010